Siemens K44 Benutzerhandbuch

Before you start programming K44 Duo, make a note 
of the codes to be used, to what timing group they 
should belong and which relay output they should 
control. At the back of this manual you will find a 
chart designed for this purpose. Look at the chart 
as you program K44 according to the instructions 
below.

During programming you will be guided by the buzzer 
and the LEDs.
In programming mode before a function is chosen: 
Green and yellow LED flashes.
During programming: Yellow LED goes out. Green 
LED is lit. 
Correct instruction: Confirmed by a rising signal 
consisting of two quick beeps. 
Faulty instruction: Confirmed by a falling signal 
consisting of two quick beeps.
NoTE!  During programming mode, if a button is not 

pressed within 20 seconds, the code lock 
goes back to normal operation.