Soundcraft RK-65K Benutzerhandbuch

(SET TIMER)

(ENTER)

(15 Seconds)

 

(Ending User ID 

Number 10)

(ENTER)

(VOID)

(THRU)

(Starting 

User No. 1)

Delete A Series Of Transponders From The System (RK65K):
Place the unit in the Program Mode (see Page 8). Press Void, 
followed by the sequence of digits representing the lowest 
transponder ID. Then press Thru followed by the sequence of 
digits representing the highest number transponder. Finally, press 
Enter. For example, to delete transponders #1 through #10:

Transponders #1 through #10 are now void.

Set the Latch Timer (RK65K/RK100M):
Put the unit into the Program mode, (See Page 8). Press SET 
TIMER, then press the sequence of digits representing the desired 
Latch Time (0 - 65535 seconds) to the unit. Press ENTER. A 
green light and beep means that the Latch Timer setting was 
changed. (If you set the Latch Timer for “0” seconds, the actual 
latch time will be approximately 0.25 seconds.) For example, 
to set the latch timer to 15 seconds, the following sequence 
would be followed;