Soundcraft RK-65K Benutzerhandbuch
(MODE)
(ENTER)
(Mode Number 5)
Radio Key
®
RK-65K Operating Guide
Secura Key
21
(MODE)
(ENTER)
(Mode Number 6)
CONVERTING TO RK100M MODE
The RK100M has been replaced by the new RK-65K. The
RK100M was designed to read randomly numbered cards and
tags without facility codes (RKCM-01, RKKT-01). The RK100M
unit is only able to enroll up to 100 users. If you need to replace
an existing RK100M, or if you want a reader that uses random
cards and tags, you may convert this product to the RK100M
mode, as shown below.
RK100M was designed to read randomly numbered cards and
tags without facility codes (RKCM-01, RKKT-01). The RK100M
unit is only able to enroll up to 100 users. If you need to replace
an existing RK100M, or if you want a reader that uses random
cards and tags, you may convert this product to the RK100M
mode, as shown below.
In the RK100M mode, some programming steps differ from the
RK-65K. The following section also describes those different
program steps.
RK-65K. The following section also describes those different
program steps.
Converting between RK-65K and RK100M modes:
Place the unit in the Program Mode (see Page 8). Press MODE,
followed by “5” (for RK65K mode) or “6” (for RK100M mode).
Press ENTER. (RK-65K mode is the default.)
Place the unit in the Program Mode (see Page 8). Press MODE,
followed by “5” (for RK65K mode) or “6” (for RK100M mode).
Press ENTER. (RK-65K mode is the default.)
+ 5 + (For RK65K mode)
+ 6 + (For RK100M mode)