Soundcraft RK-65K Benutzerhandbuch

(User ID Number 12)

(ADD)

(ENTER)

(ID Number 995)

(THRU)

Add a Transponder by Entering the Transponder ID:
Instead of presenting the transponder, you can also use the 
Programmer to enter the Transponder ID number: Put the 
unit into the Program mode (See Page 8). Press ADD then 
press the sequence of digits representing the desired User ID 
Number (1 - 100). Press THRU. Press the sequence of digits 
representing the ID number printed on the Transponder, then 
press ENTER.  For example, to program a Transponder ID 
Number 995 into User ID Number 12, the following sequence 
would be followed;

Record the User ID Number and Transponder ID Number in 
the User Log Form.

NOTE: If you assign a new transponder to a User ID Number where 
another transponder was already assigned, the new transponder 
will replace the old transponder for that User ID Number.

Add a Series of Transponders to the System:
Put the unit into the Program mode (See Page 8). Press ADD, 
then press the sequence of digits representing the desired