Avaya 03-300430 Benutzerhandbuch
ATM-EI (Expansion Interface Circuit Pack)
Issue 1 June 2005
527
ATM-EI-Related Commands
The following commands can be helpful in resolving ATM-EI problems:
Replacing an ATM-EI Circuit Pack
Standard Reliability
1. Enter busyout atm pn# (this is service-affecting) at the SAT.
2. Replace the ATM PNC circuit pack, and reconnect the fiber.
2. Replace the ATM PNC circuit pack, and reconnect the fiber.
3. Enter release atm pnc.
4. Wait 2½ minutes for board insertion.
4. Wait 2½ minutes for board insertion.
5. Enter list sys-link to verify that the links are up.
6. Enter test board location, and verify that every test passes.
6. Enter test board location, and verify that every test passes.
Duplex or High Reliability
There is 1 ATM-EI circuit pack in each PN.
1. Enter busyout atm pnc # at the SAT.
Note:
Note:
If the ATM-EI is in a PN, this is service-affecting.
2. Replace the circuit pack.
3. Enter release atm pnc.
4. Wait 2½ minutes for board insertion.
4. Wait 2½ minutes for board insertion.
5. Enter list sys-link to verify that the links are up.
6. Enter test board location, and verify that every test passes.
6. Enter test board location, and verify that every test passes.
add atm pnc
list measurements atm
busyout/release atm pnc
remove atm pnc
busyout/release board
reset board
change atm pnc (pnc duplication)
status atm pnc
display atm pnc
status cabinet
list atm oam-statistics
status port-network
list atm pnc
test board