Heath Zenith 598-1165-03 Benutzerhandbuch

Features

• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight

hours.

598-1165-03

ON-TIME

TEST

1 5 10 MIN

Set ON-TIME switch to 1,
5, or 10 minutes.

ON-TIME

Set the ON-TIME switch
on the bottom of the cover
plate to

TEST.

ON-TIME Switch at 1, 5,

or 10 minutes

... back on.

1 Second

OFF then...

Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.

Mode Switching Summary

Flip light switch

off for one second

then back on*

* If you get confused while switching modes,

turn the power off for one minute, then back
on. After the calibration time the control will
be in the AUTO mode.

MANUAL MODE

AUTO

TEST

Note: When first turned on wait about 1

minutes for the circuitry to calibrate.

Requirements

• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control

must be wired through a switch.

•

Some electrical codes require installa-
tion by a qualified electrician.

MANUAL MODE

AUTO

TEST 1 5 10 MIN

* resets to Auto Mode at dawn.

OPERATION

TEST

Motion Sensing Coach
Lights

This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
• Some Models Include an Optional Decora-

tive Tail Assembly

Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.

Mode:

On-Time

Works: Day Night

Test

5 Seconds

Auto

1, 5, or 10 Min

Manual

To Dawn*