Bosch G Benutzerhandbuch
D9000,G & GV2 Series | Owner's Manual Supplement
Bosch Security Systems | 5/05 | 33267F
13
10.3
Cycle Door?
1.
To momentarily unlock an access door and allow a person into an
area, press [ENT] at the Cycle Door? prompt.
area, press [ENT] at the Cycle Door? prompt.
The display shows
CYCLE 1 2 3 4 5 6 7 8
if all doors are in
a normal state and available. If a door is not in a normal state, the
number of the door is replaced with one of the symbols indicated
in Table 1.
number of the door is replaced with one of the symbols indicated
in Table 1.
Table 1: Key to Symbols
Symbol Description
---
Door is not active, not in scope, or user does
not have access level authority
not have access level authority
C
Door is timed door sequence
U
Strike and shunt are latched active (held open)
X
Strike and shunt are deactivated (secured)
P
There is a problem with the door; call your
security company
security company
2.
Enter the number of the door to cycle then press [ENT]. This
door cycles and the display changes to reflect the new status of
the doors. For example, to cycle Door 3, at the following prompt:
door cycles and the display changes to reflect the new status of
the doors. For example, to cycle Door 3, at the following prompt:
CYCLE DOOR 1 2 3 4 5 6 7 8
press [3], then [ENT]. The display shows:
CYCLE DOOR 1 2 C 4 5 6 7 8
This
indicates that all doors are in a normal state, except for Door
3, which is cycled.
3. Press
[ESC]
to leave this subfunction, or enter another door
number to cycle.