ResMed S8 ESCAPE SYSTEM Benutzerhandbuch

NGLISH

TTACH

UMIDIFIER

TTACH

UMIDIFIER

TTACH

UMID

IRE

UMIDIFIER

Please refer to the illustration in section

E of the illustration sheet, and your HumidAire 3i

manual.
The

UMID

IRE

attaches to the front of the

S8 E

SCAPE

to provide heated

humidification. No other accessories are required for its use.
Notes:

a. Make sure the water chamber of the HumidAire 3i is empty before you attach or

detach the humidifier.

b. Remove the connector plug on the S8 Escape (see section

A of the illustration

sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.

TORING

THE

UMID

IRE

Store the

UMID

IRE

in the larger, mesh-top pouch of the

S8 E

SCAPE

carry bag when

not in use.

TTACH

UMID

IRE

UMIDIFIER

Please refer to the illustrations in section

I of the illustration sheet.

To connect your

S8 E

SCAPE

to a

UMID

IRE

humidifier you need medium sized

21” (52 cm) air tubing.

Fill the

UMID

IRE

water chamber and place inside the

UMID

IRE

. Connect the

medium 21” (52 cm) and long 6’6” (2 m) air tubing (

I-1), and close the humidifier lid.

Place the

S8 E

SCAPE

on top of the

UMID

IRE

(

I-2) and connect the free end of the

medium air tubing to the air outlet (

I-3).

Note: To avoid water spilling into the

S8 E

SCAPE

, do not put it underneath the humidifier.

Assemble your mask system and connect it to the free end of the long air tubing (

I-4).

Plug the

UMID

IRE

power cord into a power outlet. Connect the

S8 E

SCAPE

power

cord to the socket at the rear of the

S8 E

SCAPE

and plug the other end into a power

outlet.
Please refer to the HumidAire User’s Manual for further details.

WARNING

Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The

S8 E

SCAPE

is now ready for use with the

UMID

IRE