Bosch D7412GV4 Benutzerhandbuch

D9412GV4/D7412GV4/D7212GV4 | Owner's Manual Supplement  

 

Bosch Security Systems, Inc. | 9/11 | F01U245224-02 

31 

 

If the end user acknowledges an alarm within the Abort Window: 

•

 

The alarm output is silenced. 

•

 

No alarm, restoral, or cancel reports are sent. 

•

 

No alarm, restoral, or cancel reports are entered in the control 
panel event log. 

If no user acknowledges the alarm within the Alarm Abort Window, 
the control panel sends the appropriate alarm reports. 

If a user acknowledges an alarm after the Abort Window expires, 
but before Bell Time expires, the control panel sends a Cancel 
Report. The Cancel Window starts when the alarm is sent and 
stops when the Alarm Bell timer expires or a user acknowledges 
an alarm. 

This feature allows any passcode with the Send Duress permission 
enabled to always send a Duress Alarm event upon entry. The 
Duress Alarm feature allows an installation to allocate unique 
passcodes as the main duress passcodes for all users.  

Additionally, when the SIA CP-01 compliant Duress Alarm option is 
enabled, the Passcode +1 and +2 options are disabled. 

This feature allows for a

 control panel to automatically bypass a point 

that reports two or more alarm or trouble events within the same arm 
cycle. The maximum number of faults allowed on a point is called the 
Swinger Count. This value was set by the installer.