Bosch D9412G Benutzerhandbuch
D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED
EN | 109
Bosch Security Systems | 1/04 | 47775E
S## Cmd Center 1[through 8]
Default: Blank
Yes
Watch tone sounds
at this command
center.
at this command
center.
15
Sound Watch Tone at
Command Center: This function
sounds the Watch Tone at the
command center address
programmed in Parameter 1. The
Watch Tone sounds at all
command centers with the address
programmed. Press [ESC] to
silence the tone.
Command Center: This function
sounds the Watch Tone at the
command center address
programmed in Parameter 1. The
Watch Tone sounds at all
command centers with the address
programmed. Press [ESC] to
silence the tone.
Sound Watch Tone defines the
command center address where
the Watch Tone sounds. Enter the
specific address at the
command center address where
the Watch Tone sounds. Enter the
specific address at the
S## Cmd
Center
prompt.
Selection: Yes or No
Enable the sked to beep the command
center programmed Yes.
center programmed Yes.
No
Watch tone does not
sound at this
command center.
sound at this
command center.
S## Access Ctl Level #
Default: No
Yes
Enable Access
Control Level #
Control Level #
16
Access Control Level On: This
function emulates the ACCESS
CMD LEVEL command that
determines whether a user’s
token/card level is ENABLED?,
allowing access granted rights.
This affects all doors that this user
is assigned to with this specific
authority level.
function emulates the ACCESS
CMD LEVEL command that
determines whether a user’s
token/card level is ENABLED?,
allowing access granted rights.
This affects all doors that this user
is assigned to with this specific
authority level.
Selection: Yes or No
Activate a sked, which enables the
Access Level(s) 1 through 14 with Yes.
Access Level(s) 1 through 14 with Yes.
No
Do not enable
Access Control
Level #.
Access Control
Level #.
The D9412G supports eight doors; the D7412G supports two doors.
0101
0101
0101
0101
0101
To regulate a user’s access for certain doors, assign the user a different authority level # with the same
authority functions enabled. For example, a user can be assigned Authority Level 1 for Door 1 and
Authority Level 2 for the remaining doors. You can enable/disable Authority Level 1 for Door 1 without
affecting his authority level for Doors 2 through 8).
authority functions enabled. For example, a user can be assigned Authority Level 1 for Door 1 and
Authority Level 2 for the remaining doors. You can enable/disable Authority Level 1 for Door 1 without
affecting his authority level for Doors 2 through 8).
S## Access Ctl Level#
Default: No
Yes
Turn off access for
level #.
level #.
17
Access Control Level Off: This
function emulates the ACCESS
CMD LEVEL command that
determines whether a user’s
token/card level is disabled. This
function allows access to be turned
off for the levels programmed.
function emulates the ACCESS
CMD LEVEL command that
determines whether a user’s
token/card level is disabled. This
function allows access to be turned
off for the levels programmed.
Selection: Yes or No
The first parameter enables the sked to
turn off access for levels 1 through 14.
turn off access for levels 1 through 14.
No
Do not turn off
access for level #.
access for level #.
S## Door 1 [through 8]
Default: No
Yes
Unlock Door #.
18
Unlock Door: This function
emulates the
emulates the
UNLOCK?
12345678
command center
function for unlocking a door.
Selection: Yes or No
Enable the sked to unlock the doors
programmed Yes.
programmed Yes.
No
Do not unlock Door
#.
#.