Desa 000 50 Benutzerhandbuch

9

099176

Wrong pump pressure

Dirty air output, air intake
   and lint filters

Dirty fuel filter

Dirt in nozzle

Dirty photocell lens

Bad flame-out control

Heater ignites, but
flame-out control
shuts off heater after
a short period of
time.

!

See Pump Pressure
   Adjustment, page 11.

See Air Output, Air Intake
   and Lint Filters, page 10.

See Fuel Filter, page 11.

See Nozzle, page 12.

Clean photocell lens.

Replace flame-out control.

Heater will not
ignite, but motor runs
for a short period of
time.

Wrong pump pressure

Carbon deposits on spark
   plug and/or improper gap

Dirty fuel filter

Dirt in nozzle

Water in fuel tank

Electronic ignitor not

grounded

Bad electronic ignitor

!

Motor does not start
when heater is plugged
in, fan rotates slowly
or does not turn.

Flame-out control not reset

Solid state relay not

allowed to reset

Binding pump rotor

See Pump Pressure
   Adjustment, page 11.

See Spark Plug, pages 11
  and 12.

See Fuel Filter, page 11.

See Nozzle, page 12.

Drain and flush fuel
   tank with clean kerosene.
   See Storage, page 8.

Make sure electronic ig-
   nitor mounting is tight.

Replace electronic ignitor.

Press flame-out control
reset button.

Wait two minutes
   before trying to restart
   heater.

If fan is hard to turn, see
   Pump Rotor, page 13.