Heath Zenith SL-6157 Benutzerhandbuch
-3-
595-5345-06
7a - Mount with Double Sided Tape
❐
Install the battery cover.
❐
Peel the protective backing from one side of two pieces of the double
sided tape, and apply the tape to the areas on the back of the transmitter
as shown in Figure 4.
sided tape, and apply the tape to the areas on the back of the transmitter
as shown in Figure 4.
❐
Remove the remaining protective backing. Carefully stick the transmitter
to the exact location marked in step 6.
to the exact location marked in step 6.
7b - Mount with Screws & Hollow-Wall Fasteners
❐
Temporarily remove the batteries.
❐
Hold the transmitter in the desired location, and mark the two mounting holes.
❐
Set the transmitter aside. Drill two 7/32 inch mounting holes. Tap the hol-
low-wall fasteners into the two holes.
low-wall fasteners into the two holes.
❐
Hold the transmitter in place, and secure with the two screws.
❐
Reinstall the batteries and the battery cover.
Double
Sided Tape
Double
Sided Tape
Mounting Holes
Figure 4
Figure 5
5. Adjust the Microphone Sensitivity so that it is at the least sensitive posi-
tion to reliably activate the transmitter. If the sensitivity is set too high, it
may false trigger on common household noises.
may false trigger on common household noises.
6. When the system is working properly, carefully mark the desired location
of the Extension Transmitter, and go to step 7 for final installation.