Heat & Glo LifeStyle 36 Benutzerhandbuch

Heat & Glo  •  Galleria Doors  •  2106-937 Rev. C  •  5/11

Installation & Operating Instructions

Leave this manual with party responsible for use 
and operation.

HOT! DO NOT TOUCH. 
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.

Glass and other surfaces are hot during operation and cool 
down.

•  Keep children away. 

• CAREFULLY SUPERVISE children in same room as 

appliance.

•  Alert children and adults to hazards of high temperatures.

•  Do NOT operate with protective barriers open or removed.

•  The doors must remain closed if children will be present 

during the operation of the fi replace.

• The doors may be made operable per these instructions. 

This may be done only upon request of a person responsible 
for the use and operation of the fi replace.

•  The doors can be returned to the locked position following 

these instructions.

•  Keep clothing, furniture, draperies and other combustibles 

away.

• When the doors are in  an operable state, the door-locking 

screw must be retained in the threaded nut behind doors.

1.  To lock the doors shut, insert the black 10-24 Phillips 

head bolt through the small notches by the handles. 
Tighten the bolt into the threaded insert mounted 
between the spring clips on the lower hinge bracket 
See Figure 1.

Figure 1.

2.  To unlock the doors, remove the bolt and open the 

doors. Reinstall the bolt into threaded insert from the 
back side so the bolt doesn’t interfere with the door.

Use a microfi ber cloth and Windex® Original Glass 
Cleaner or 03M003 Stove Bright® Glass Cleaner to clean 
the door immediately after installation to remove acids 
deposited by the installer or technician.  Spray the cleaner 
onto the microfi ber cloth and carefully wipe the entire 
surface.  The door should be cleaned in this manner 
annually by the homeowner to remove fi ngerprints  or 
other contaminants.  Once oxidation of the paint pigment 
has occurred, cleaning will not restore the original color.