IDEAL INDUSTRIES MX34 Benutzerhandbuch

R E S I D E N T I A L

R E S I D E N T I A L

Tape Measure

Level
Pliers
Step Ladder
Screwdriver
Saw
Claw Hammer
Sawhorses

7

/

16

",   

1

/

2

" &  

9

/

16

" Sockets and Ratchet

Drill with 

3

/

16

", 

5

/

32

",     

3

/

8

" & 

7

/

16

" drill bits

Two short pieces of rope about 4' in length 
Locking Pliers or C Clamps
Two 

1

/

2

"  x 18" Winding Bars 

(Torsion Springs only) 

3

/

8

" Open-end Wrench 

(Torsion Spring Only)

NOTE:  On 8' and 9' wide doors, a reinforcement strut must be 
purchased if an automatic garage door opener is installed.  
The majority of homes today have automatic garage door openers.  
Therefore, Ideal doors do not include a lock. If desired, an easy-to-install, 
heavy-duty, keyed lock is available.

All tools may be purchased in Hardware Dept.

All steel used in this 
product is 100% recyclable 
at the end of its useful life.

REID-CH-RESIBR-08

In the interest of better quality and value, we are continually improving 
and updating our products.  Consequently,  photos, illustrations and
available options may sometimes differ from present models.

Ideal Door

 

1-800-621-3667

Ideal Door

     

is a brand of Clopay Building Products. 

Clopay Building Products Company, Inc. 2008 
A Griffon Company, Inc.  Printed in U.S.A.

®

©

®

11"

14

1

/

2

"

6

1

/

2

"

n/a

12"

15

1

/

2

"

10"

7"

12"

14"

9

1

/

2

"

n/a

3

3

/

4

"

3

3

/

4

"

6"

6"

ITEMS NEEDED BEFORE INSTALLING YOUR GARAGE DOOR

EXTENSION 

SPRING

TORSION

SPRING

SIDEROOM

EZ-SET®

TORSION SPRING

12" TRACK RADIUS

15" TRACK RADIUS

LOW HEADROOM

DOUBLE TRACK (standard)

LOW HEADROOM DOUBLE 

TRACK (rear mount)

1.   Measure existing door width and height in feet and inches.
     This determines the size of door needed.  The rough opening
     should be the same size as the door.
     Width: ____________________     Height: ____________________

2.  Measure for sideroom: 3

 3

/

4 

" is required on each side for

     installation of the vertical track for standard extension or torsion
     springs, or EZ-SET

     

Torsion Spring.

     Sideroom: __________________

3.  Measure area labeled “headroom”— distance between the top of
    the door opening (“jamb header”) and the ceiling (or first
    obstruction, ex: light fixture).  11" is required for standard
    installation of extension springs; 12" on standard torsion springs
    and EZ-SET

     

Torsion Spring. If you have restricted headroom,

    special hardware is available. Low headroom hardware is available
    to reduce requirement to as low as 4

1

/

2

" (minimum with standard

    extension spring). EZ-SET

     

Torsion Spring low headroom

    requirement is 9

1

/

2

". Note: If door height extends above the

    opening, the headroom measurement should be adjusted accordingly.
    Existing headroom: ___________
    Headroom needed: ___________

4.  Measure area labeled “backroom”— distance is measured from the
    garage door opening toward the back wall of the garage.
    Backroom: __________________

     Common garage door widths include 8', 9', 16' and 18'.  Common garage door
     heights include 7' and 8'.  See Menards Team Member for additional size availability.

®

®

®