Heat & Glo LifeStyle SL-550 Merkblatt

Heat & Glo  •  SL-550, SL-750, SL-959 Door Installation Instrucitons  •   539-925 Rev. E  •   5/11

Step 2.  

SL-TR/TV Series: Remove the lower louver 
assembly by lifting the louver out of the slots 
of the fi replace.

Step 3.  

Cut the top 2 ½” louver off of the lower louver 
assembly as shown in Figure 2.  Note:  Assure 
all the sharp burrs are removed after cutting.

Step 4.  

Reinstall the lower louver assembly.

Step 5.  

Install the door option.

Step 6.  

Install the top louver assembly which came 
with the optional door.  

Note: Install shoulder screws to the side of the unit (see 

Figure 1).

Leave this manual with party responsible for use 
and operation.

Step 1.  

SL-TR/TV Series: Remove the top louver as-
sembly, which was originally shipped with the 
fi replace, and discard.

 

SL-TRS Series: Lower louver must be ordered 
separately. Proceed to Step 3.

Use a microfi ber cloth and Windex® Original Glass 
Cleaner or 03M003 Stove Bright® Glass Cleaner to clean 
the door immediately after installation to remove acids 
deposited by the installer or technician.  Spray the cleaner 
onto the microfi ber cloth and carefully wipe the entire 
surface.  The door should be cleaned in this manner 
annually by the homeowner to remove fi ngerprints  or 
other contaminants.  Once oxidation of the paint pigment 
has occurred, cleaning will not restore the original color.  

Please contact your Heat & Glo dealer with any questions 

or concerns. 

For the location of your nearest Heat & Glo dealer, 

please visit www.heatnglo.com.

Heat & Glo, a brand of Hearth & Home Technologies Inc. 

7571 215th Street West, Lakeville, MN 55044

www.heatnglo.com