Empire Products SR-10T-3 Benutzerhandbuch

Page 16

16009-1-0504

PLEASE NOTE: When ordering parts, it is very important that part number and description of part coincide.

1

13347

CASING SIDE ASSEMBLY - LEFT

2

SR-180

CASING BACK

3

R-2313

PIEZO IGNITOR

4

SR-008

CASING SIDE ASSEMBLY - RIGHT

5

SR-113

VALVE BRACKET

6

R-6563

GAS VALVE -SIT

7

12438

TUBING - GAS VALVE TO BURNER

8

12437

TUBING - INLET REGULATOR TO GAS
VALVE

9

10753

iNLET REGULATOR BRACKET

10

R-5097

INLET REGULATOR - NAT

10

R-5098

INLET REGULATOR - LPG

11

SR-158

TUBING - GAS VALVE TO PILOT

12

R-2314

ORIFICE HOLDER

13

R-2317

MAIN BURNER ORIFICE - NAT

13

R-2476

MAIN BURNER ORIFICE - LPG

14

R-2331

BURNER

15

R-6308

PILOT ASSEMBLY (LPG ONLY))

INDEX

  PART

NUMBER

  NUMBER

DESCRIPTION

INDEX

  PART

NUMBER

  NUMBER

DESCRIPTION

(INCLUDES ITEMS 16 & 17)

15

R-6307

PILOT ASSEMBLY (NAT ONLY))
(INCLUDES ITEMS 16 & 17)

16

R-6310

PILOT THERMOCOUPLE

17

R-6309

SPARK IGNITOR

18

SR-179

PILOT BRACKET (NAT)

18

SR-032

PILOT BRACKET (LPG)

19

SR-153

ORIFICE SHIELD

20

R-2305

CHROME GRILL

21

SR-134

CASING LOUVER (2 REQUIRED)

22

SR-129

REFLECTOR ASSEMBLY

23

SR-135

HEAT SHIELD

24

R-1992

BULB CLIP

25

SR-154

OPTIONAL SRS-10 FLOOR STAND
KIT

NS

R-2390

IGNITOR WIRE

NS

SR-216

HARDWARE PACKAGE

a. Spark electrode broken - replace.
b. Ignitor wire may not be attached to spark electrode -

attach.

c. Ignitor wire damaged - replace.
d. Piezo ignitor defective - replace.

a. No gas to heater - turn on gas.
b. PILOT position not properly aligned - turn gas control

knob to PILOT position and depress.

c. Pilot is blocked from spider web or dirt - clean pilot, see

Page 14.

released.
a. Control knob in PILOT position not completely

depressed or held in long enough.

b. INTERLOCK latching device is operative - see "Lighting

Instructions," Page 12, Step 9.

c. Thermocouple not tightened into gas control - tighten

thermocouple.

d. Pilot flame not surrounding thermocouple - clean pilot,

see Page 14.

e. Inlet gas pressure too low, contact gas supplier.
f. Thermocouple defective - replace.
g. Gas control defective - replace.

a. Main burner orifice is blocked - clean, see "Main Burner

Flame Characteristics," Page 13. Attention: The number
stamped on the main burner orifice is a millimeter
diameter.

b. Inlet gas pressure too low, contact gas supplier.

a. Pilot is blocked - clean pilot, see Page 14.
b. Inlet gas pressure too low, contact gas supplier

Parts can be ordered only through your service person or dealer. For best results, the service person or dealer should order parts through
the distributor. Parts can be shipped directly to the service person/dealer.

All parts listed in the Parts List have a Part Number. When ordering parts, first obtain the Model Number from the name plate on your
equipment. Then determine the Part Number (not the Index Number) and the Description of each part from the following appropriate
illustration and list. Be sure to give all this information . . .

Unvented Heater Model Number 

Part Description 

Unvented Heater Serial Number  

Part Number 

Type of Gas (Propane or Natural) 

Do not order bolts, screws, washers or nuts. They are standard hardware items and can be purchased at any local hardware store.

Shipments contingent upon strikes, fires and all causes beyond our control.

 Empire Comfort Systems, Inc.  Nine Eighteen Freeburg Ave.  Belleville, Illinois 62222-0529