John Deere AC-100LP Benutzerhandbuch

14 

 

Operator’s Manual

No electrical power to heater.

 

Fan hitting inside of heater shell.

 

Fan blades bent.

Defective motor. 

 

 

User did not follow installation or 

operation instructions properly. 

 

No spark at ignitor. To test for spark, 

see "Service: Ignitor" and follow 

step 8. If you see spark at ignitor, 

have heater serviced by qualified 

service person. If no spark seen:

a. Loose or disconnected ignitor  

    wire

b. Wrong spark gap

c. Bad ignitor electrode 

d. Bad spark transformer

Check voltage to electrical outlet. If volt-

age is good, check heater power cord 

for breaks. 

 

Adjust motor / fan mount to keep fan 

from hitting inside of heater shell. 

 

Replace fan.  

 

Replace motor.  

 

 

Repeat installation and operation 

instructions. 

 

 

 

 

 

a. Check ignitor wire. Tighten or reattach  

    loose ignitor wire. See "Maintenance:     

    Spark Transformer" for ignitor wire     

    location

b. Set gap between ignitor electrode and  

    nozzle to .13"/.15" (3.3/3.8 mm)

c. Replace ignitor electrode. See 

    "Maintenance: Ignitor".

d. Replace spark transformer. See 

    "Maintenance: Spark Transformer".