Dimplex Indoor Electric Fireplace Benutzerhandbuch

The remote control operates the fireplace levels sequentially.  The level

is increased every time the ON button on the transmitter is pressed.
The fireplace can be turned off at any point by pressing the OFF button
on the remote control transmitter.

Level 1:  The flame effect is turned on and the first red indicator light is

activated.

Level 2:  The flame effect remains on, the heater is activated to the low

heat setting, and the first and second red indicator lights are activated.

Level 3:  The flame effect remains on, the heater is set to the high heat

setting, and all three red indicator lights are activated.

MANUAL CONTROLS
The fireplace can also be controlled in a similar manner to the remote

control with switches located on the fireplace (FIGURE3).

Main on/off switch, supplies power to the remote control receiving unit.

When placed in the on position level 1 indicator will flash.

Main Power Switch models without remote control:
Main on/off switch, activates the flame effect.
B.

Operates fireplace in the same manner as the remote control

transmitter.  Pressing the left side of this switch has the same effect as
the ON button on the remote control and the right side has the same
effect as the OFF button of the remote control.  Pressing once to the
left activates Level 1, twice activates Level 2, three times activates
Level 3.  Pressing to the right turns the fireplace off.

Heater Control Switch models without remote control:
Heater on/off switch activates heater to high level.