Dimplex NBDF2608 Benutzerhandbuch

Seite von 20
 
5
SAVE THESE INSTRUCTIONS
⑯ 
Do not insert or allow foreign 
objects to enter any ventilation or 
exhaust opening as this may cause 
an electric shock or fire, or damage to 
the heater. 
 
Although this unit is of zero 
clearance design, to prevent a 
possible fire, do not block air intake 
or exhaust in any manner. Do not use 
on soft surfaces, like a bed, where 
openings may become blocked. 
 All electrical heaters have hot and 
arcing or sparking parts inside. Do not 
use in areas where gasoline, paint, or 
flammable liquids are used or stored 
or where the unit will be exposed to 
flammable vapors. 
⑲ 
Do not modify the electric 
fireplace. use it only as described 
in this manual. Any other use not 
recommended by the manufacturer 
may cause fire, electric shock or 
injury to persons. 
Avoid the use of an extension 
cord. Extension cords may overheat 
and cause a risk of fire. If you must 
use an extension cord, the cord shall 
be no. 14 AWG minimum size and 
rated not less then 1875 Watts. 
  Do not burn wood or other 
materials in the electric fireplace.
 
Do not strike the fireplace glass.
㉓ 
Always use a certified electrician 
should new circuits or outlets be 
required
㉔ 
Always use properly grounded, 
fused and polarized outlets.
㉕ 
Disconnect all power supply 
before performing any cleaning, 
maintenance or relocation of the unit. 
㉖ 
 When transporting or storing the 
unit and cord, keep in a dry place, 
free from excessive vibration and 
store so as to avoid damage.
  IMPORTANT INSTRUCTIONS