Dimplex DF2622BLK Benutzerhandbuch

7

 WARNINg:  Ensure the power 

cord is not installed so that 

it is pinched or against any 

sharp edges and ensure that 

the power cord is stored or 

secured to avoid tripping or 

snagging to reduce the risk of 

fire, electric shock or injury to 

persons.  

  Electrical outlet wiring must 

comply with local building 

codes and other applicable 

regulations to reduce the risk 

of fire, electric shock and injury 

to persons.

  Do not attempt to wire your 

own new outlets or circuits.  To 

reduce the risk of fire, electric 

shock or injury to persons, 

always use a licensed 

electrician.

Foam 

Block

Cable

Ties

Front

Glass

Trim

Track

Log Set 

Assembly

The only assembly required is 

to slide the Front Glass onto the 

fireplace and install hardware to 

keep it in place.

remove fireplace and glass 

1. 

carefully from the carton, 

discard the plastic bag and 

foam packaging.
remove the foam block from 

2. 

within the fireplace (Figure 1).
using side cutters or scissors, 

3. 

cut and remove the two (2) 

cable ties as shown in Figure 

1 and remove the cardboard 

that protects the Log set 

Assembly.
Remove the right hand side 

4. 

Trim by removing three (3) 

Phillips screws at the side of