Dimplex BF45DXP Benutzerhandbuch

8  

www.dimplex.com

 WARNINg:  Disconnect all 

power coming to fireplace at main 

service panel before attempting 

maintenance or cleaning to 

reduce risk of fire, shock or 

damage to persons.

Allow at least 5 

minutes for light bulbs to cool off 

before touching bulbs to avoid ac-

cidental burning of skin.  
Tool Requirements: Phillips 

screwdriver
Light Bulb Replacement: 

Light bulbs need to be replaced 

when you notice a dark section 

of the flame or when the clarity 

and detail of the log exterior 

disappears.  There are four bulbs 

under the log set which generate 

the flames and embers.
Helpful Hints: It is a good idea to 

replace all light bulbs at one time 

if they are close to the end of their 

rated life.  Group replacement will 

reduce the number of times you 

need to open the unit to replace 

light bulbs.  Long life bulbs are 

recommended to reduce the 

frequency of bulb changes.
Light Bulb Requirements: 

Quantity of 4 clear chandelier or 

candelabra bulbs with an E-12 

(small) socket base, 60 Watt 

rating.  Example: GE 60BC or 

Philips 60CTC. 
DO NOT EXCEED 60 WATTS 

PER BULB.

 CAUTION:  When handling log 

only apply force to the ember bed 

section not directly to the logs.
To access the light bulb area

open steel curtain (remove 

1. 

glass doors if applicable).
remove two screws on log 

2. 

bracket and set aside 

(Figure 2)
Pull front edge of plastic 

3. 

ember bed or plastic grate 

up and forward until rear 

tab releases from the ledge 

located at the bottom of the 

mirror (Figure 3).

 NOTE: Log set fits tightly 

into firebox, some force may be 

necessary to remove.

screws