Harman Stove Company XL Benutzerhandbuch

15. Set the High-Low Regulator to desired setting: Turn 

fully  counterclockwise  for  High  and  fully  clockwise 

for Low.

NOTE: An odor, resulting from the initial heating of new 

materials in your heater, is not unusual during the 

first fire, and in most cases will disappear after an 

hour or two.

HOW TO TURN OFF THE FIRE
1.  If using optional thermostat, set thermostat to the 

lowest position.

2.  Turn off the electric power to the appliance.
3.  Turn the ON-OFF/THERMOSTAT switch to the OFF 

position.

4.    Push  in  the  gas  control  knob  slightly  and  turn  it 

clockwise to “OFF.”

NOTE:  The knob cannot be turned from “PILOT” to 

“OFF” unless it is pushed in slightly. Do not force it.

 The adjuster can be accessed with a phillips screw 

driver just above the valve . Turn the adjuster clockwise 

to increase flame height and counterclockwise to de-

crease.  See above left. Adjusting the flames too high 

will cause them to have black tips and cause sooting. 

Sooting can cause the glass to get dirty.

Warning: The  unit  and  adjuster  may  be  hot.  Wear 

gloves and arm protection if making adjustments while 

in operation.   

If pilot flames are less than shown at left, have your 

service technician increase the pilot flame height.

Air Shutter

Adjustment

Normal Flame pattern. Note: Flames will vary in height and 

position depending on the placement and the amount of 

ember wool.

Pilot Flame Size

Pressing the ignitor button should produce a spark between 

the ignitor electrode and the pilot where shown above.

10