Haier KC18AGH Benutzerhandbuch

14

When the unit is under defrost status, it will show “H1” on the  
display indicator board . Even if turn off the unit by remote 
controller, the unit  will not stop defrosting until it is finished; 

   

If change any setting mode by remote controller, the new 
functions which is set last time, won't be carried out until 
defrosting process is finished. 
  

About swing up and down
1. Press swing up and down button continuously more than 2s,
    the main unit will swing back and forth from up to down, and 
    then loosen the button, the unit will stop swinging and 
    present position of guide louver will be kept immediately.

2. Under swing up and down mode, when the status is 
    switched from off to     , if press this button again 2s later,     
         status will switch to off status directly; if press this button 
    again within 2s,the change of swing status will depend on 
    the circulation sequence stated below: 

    

About switch between Fahrenheit and Centigrade.
Under status of unit off, press “MODE” and “-” buttons 
simultaneously and release both button immediately will switch 
in °C and °F.

In the event of power failure, the unit will stop. When the
 power is resumed, the unit will restart automatically after 
three minutes.

OFF