Denso 36 Benutzerhandbuch
3
UNLOCKED
LOCKED
FRONT AND BACK HANDLES
Moving the Unit
Unlock the casters and push the MovinCool unit, using the side handles, to a fl at, level
Plugging in the Unit
•
Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt
are present, wipe off with a clean, dry cloth.
are present, wipe off with a clean, dry cloth.
•
Check the power cord, plug and prongs for damage or excess play. If any damage or
excess play is found, contact your MovinCool reseller for repair.
excess play is found, contact your MovinCool reseller for repair.
•
Fully insert plug into the A/C outlet.
WARNING:
•
If the power cord or plug is damaged, repair should only be performed by quali-
fi ed electrical personnel.
fi ed electrical personnel.
•
Do not connect/disconnect the power cord or attempt to operate buttons with
wet hands. This could result in electrical shock.
wet hands. This could result in electrical shock.
CAUTION: The AC outlet (208/230 VAC Single Phase, 60Hz) needs to be rated at
30A or higher. Do not share the outlet with any other instrument or equipment.
NOTE:
•
Make sure the AC outlet is free of dirt, dust, oil, water, or any other foreign mat-
ter.
ter.
•
The Offi ce Pro 36 model is equipped with an approved NEMA plug confi guration
(6-30). The appropriate outlet must be used for this plug type.
(6-30). The appropriate outlet must be used for this plug type.
surface and set the casters back to the LOCKED position.