Danby DPAC9010 Benutzerhandbuch

Warning Light

Receiving Sensor

POWER SWITCH: Turns unit ON/OFF

MODE: Allows you to scroll through and

select desired operating mode. 

FAN: Select from three different fan settings;

AUTO-TIMER Adjust: 
AUTO TURN OFF- With machine in running mode,

press timer button to set timer control. Press 

buttons to select number of hours you would

like the unit to run before it automatically shuts off. 

AUTO TURN ON- With machine in stand by mode,

press timer button to set timer control. Press 

buttons to select number of hours before the unit 

automatically starts running in air conditioning mode. 

TEMPERATURE Adjust:
• Used for adjusting the thermostat.
• The default display is room temperature.

• In cooling mode, when 

button is pressed,

the set temperature is displayed and may be adjusted.
After 15 seconds the display will revert back to room 
temperature. Temperature is only adjustable in cool
mode. 

Condensed water may accumulate in the unit. If the

internal tank becomes full, the Warning signal in the

LCD Display will light up and the unit will not 

operate until it has been drained. 

5