GE TINSEA530JBRZ Benutzerhandbuch

In some installations, dirt or other debris may be
blown into the unit from the outside and settle in
the base pan (the bottom of the unit).

In some areas of the United States, a “gel-like” or
“slime-like” substance may be seen in the base pan.

Check it periodically and clean, if necessary.

If the vent door is open, clean the vent filter twice a year 
or as required.

Turn the Zoneline off before cleaning.

To remove the vent filter:
■ Remove the room cabinet. See the To Remove

the Room Cabinet section.

■ Remove the four screws securing the unit

flanges to the case.

■ Slide the unit from the wall case.
■ Grasp the vent filter tab and pull the filter out

by sliding it to the right.

To clean the vent filter:
■ Run water through the filter from the 

back side.

■ Dry thoroughly before replacing.

The coils on the outdoor side of the Zoneline
should be checked regularly. If they are clogged
with dirt or soot, they may be professionally
steam cleaned, a service available through your
GE service outlet. You will need to remove the 
unit to inspect the coils because the dirt 
buildup occurs on the inside.

Clean the outside coils regularly.

Turn the Zoneline off and disconnect the 
power supply.

To clean, use water and a mild detergent. 
Do not use bleach or abrasives. Some commercial
cleaners may damage the plastic parts.

Coils

Grille

9