Frigidaire FFRE1033Q1 Benutzerhandbuch

Note: This feature can be activated from the remote control ONLY, the unit must be in a cooling mode. 

To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing Start button. Next, use 

the “         ” buttons to set the desired temperature at the remote. (Note that the set temperature will only be displayed on the unit 

itself ). The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each time it 

sends a signal. lt will periodically send this signal until the feature is deactivated by pressing the remote sensing Stop button. lf the unit 

does not receive the remote sensing signal during any 3 minute interval, the unit will beep to indicate the remote sensing mode has 

ended. The display on the remote control indicates the temperature at the remote ONLY. 

NOTE: The Remote Sensing function is terminated either by using the Remote Sensing Stop button or the main ON/OFF button on the 

unit.

9

2009 Electrolux Home Products, Inc.

All rights reserved.

PRESS AND HOLD THE  

UP/DOWN BUTTONS 

TOGETHER  FOR 3 SECONDS

Note: The control is capable of displaying temperature in 

degrees Fahrenheit or degrees Celsius. 

(on some models)：   

LIGHT pulsing ( On & Off intermittently ).

PRESS  REMOTE

SENSING

START BUTTON

NOTE: Remote display

is actual temperature 

at remote control only

NOTE: Unit display shows the set temperature

If the display reads "AS" , a sensor has failed. Contact your 

Authorized Frigidaire Service Center.