Fujitsu ABU30 Benutzerhandbuch

En-11

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Vertical (up-down) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION VERTICAL SET
button. Horizontal (right-left) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION
HORIZONTAL SET button.

Each time the button is pressed, the air direction range will change as follows:

1 

 2 

 3 

 4 

 5

Types of Air flow Direction Setting:
1,2,3

:

During Cooling/Dry Modes

1,2,3,4,5 :

*During Heating mode

The remote control unit’s display does
not change.

● Use the air direction adjustments within the ranges shown above.

● The vertical airflow direction is set automatically as shown, in accordance with

the type of operation selected.

Horizontal flow 1

:

During Cooling/Dry mode

Downward flow 5

: * During Heating mode

● During AUTO mode operation, for the first minute after beginning operation,

airflow will be horizontal 1; the air direction cannot be adjusted during this pe-
riod.

Each time the button is pressed, the air direction range will change as follows:

1 

 2 

 3 

 4 

 5

The remote control unit’s display does
not change.

● Use the air direction adjustments within the ranges shown above.

Never place fingers or foreign objects inside

the outlet port could cause personal injury.

● Always use the remote control unit’s

AIR FLOW DIRECTION button to adjust
the UP/DOWN air direction flap or

RIGHT/LEFT air direction louvers. At-

tempting to move them manually
could result in improper operation; in

this case, stop operation and restart.

The louvers should begin to operate
properly again.

● During use of the Cooling and Dry

modes, do not set the UP/DOWN air

direction flap in the range 4 to 5 for
long periods of time, since water vapor
may condense near the outlet port and

drops of water may drip from the air

conditioner.

● When used in a room with infants, chil-

dren, elderly or sick persons, the air
direction and room temperature

should be considered carefully when

adjusting settings.

Example: When set to vertical air direc-

tion

Example: When set to horizontal air di-

rection

SET

ENAGY

SAVE

TIME

ADJUST

TEST

RUN

 

ACL

SET

SWING

SWING

SET

ENERGY

SAVE

TIME

ADJUST

TEST

RUN

 

ACL

SET

SWING

SWING

1 2

3

4

5

1

2

3

4

5

RIGHT/LEFT
air direction louvers