Friedrich SV12A10 Benutzerhandbuch
—17—
4.3 TROUBLESHOOTING GUIDE
In general, possible trouble is classified in two kinds.
The one is called Starting Failure which is caused from an electrical defect, and the other is ineffective Air
Conditioning caused by a defect in the refrigeration circuit and improper application.
The one is called Starting Failure which is caused from an electrical defect, and the other is ineffective Air
Conditioning caused by a defect in the refrigeration circuit and improper application.
Unit runs but poor cooling.
Ineffective Cooling
Check outdoor coil
(heat exchanger) & the fan
operation.
(heat exchanger) & the fan
operation.
Check gas leakage.
Repair gas leak.
Replace of unit if the
unit is beyond repair.
unit is beyond repair.
Satisfactory operation with
temperature difference of
inlet & outlet air ;
44~50
temperature difference of
inlet & outlet air ;
44~50
°
F(7~10
°
C)
Check heat load
increase.
increase.
Clean condenser.
Not on separate circuit.
Check inside gas
pressure.
pressure.
Adjusting of refrigerant
charge.
charge.
Malfunction of compressor.
Replacement of
compressor.
compressor.
Check cold air circulation
for smooth flow.
for smooth flow.
Dirty indoor coil
(Heat exchanger)
(Heat exchanger)
Correct above problem
Check clogging in refrigera-
tion system.
tion system.
Repair clogging in refrigera-
tion system.
tion system.
Obstruction at air outlet
Clogged of air filter.
Malfunction of fan