Friedrich PXSB26515/20/30 Benutzerhandbuch

       

 

 
92011402_R00  

Friedrich Air Conditioning Co. 

Page  2/5  

10001 Reunion Place, Suite 500 / San Antonio, Texas 78216 

(210) 546-0500 /  (800) 541-6645 /  

www.friedrich.com

 

Step 4. 

Route building power through knockouts provided for conduit connectors into junction box.  
See Figure 4. 

 
Step 5. 

Remove Left access cover and connect building power wires to the receptacle wires using 
wire nuts and replace cover.  See Figure 5. 

 
Step 6. 

Using screws provided, attached sub-base to wall sleeve using the drilled holes from 
Step2.  Be careful not to over tighten screws. 

 
Step 7. 

Adjust legs to level the sub-base.  See Figure 6. 

 
Step 8. 

Remove Right access cover.  Push excess cord through opening on the right.  Plug the 
power cord into the receptacle.  Re-install access cover making sure cord is routed through 
notch in sub-base. 

 
Step 9. 

Re-connect power to unit