Friedrich CP14 Benutzerhandbuch

  Remove and dispose of or recycle packaging materials. Remove 

tape and glue residue from surfaces before turning on the air 
conditioner. Rub a small amound of liquid dish soap over the 
adhesive with your fi ngers. Wipe with warm water and dry.

  Do not use sharp instruments, rubbing alcohol, fl ammable fl uids, 

or abrasive cleaners to remove tape or glue. These products can 
damage the surface of your air conditioner.

  Handle air conditioner carefully and gently

1.  Remove the air conditioner from the carton and place it on 

cardboard.

2.  Remove shipping screws from the rear of the cabinet (if present).

3.  Remove front grille by pulling bottom of grille upward. 

Remove hinges at top.

4. Remove air fi lter

5.  Remove the window lock bracket and screw from the air 

conditioner and set aside.

A

5.

Remove the window lock bracket and screw from the air 

conditioner and set aside.

6.  Remove front panel screw from right side of fi lter 

area.

7.  Remove the ground screw and ground wire from 

the front of the air conditioner. Save the ground 
screw.

8.  Pull on handle to slide air conditioner out of 

cabinet. Place air conditioner on cardboard.

A

NOTE: Do not lift, push, pull or remove any expanded 
polystyrene (foam) from inside the air conditioner. It is 
not packing material.