Crestron electronic 2 Benutzerhandbuch

        

Installation & Operation Manual

Use the Main Menu Screen (FIG. 10-2) to access the screens necessary to set temperatures, operating conditions, and monitor 
boiler operation.

The Crest is equipped with a SMART TOUCH control system.  All menu options are accessed by touching the screen with your 
finger or a stylus from a PDA.

The Main Menu Screen allows navigation to nine (9) 
additional screens which are used to set temperatures, 
operating conditions, and monitor boiler operation.  These 
screens are as follows:

  •  Home - Navigates back to the Home Screen.
  • Setup -  Allows access to 12 other screens for the 
    adjustment of the control parameters.
  •  Cascade - Shows the status of multiple boilers connected 
    together in a cascade arrangement (Leader only).
  •  Modulation - Shows the status of the two (2) gas train 
    systems used in the boiler.
  • BMS - Shows the information from a Building 
  Integration 

System.

  •  Pumps - Allows the installer to configure the boiler, 
    system, and DHW pumps.
  •  History - Shows the operating and fault history of the 
  control 

module.

  •  Graphs - Allows the selection of items to be graphed on a 
  chart.
 • Service - Allows the installer to control the fan 
    speed of the individual combustion systems  for the purposes 
    of combustion analysis.  Service Mode will override all 
    other heat demands, however, all limits will remain 
  active.

Reference the Crest Service Manual for more information 
regarding the nine (9) accessible screens.