Monessen Hearth C2801VF Benutzerhandbuch

Seite von 28
6                                                                                                                                                                                   
45D0080
45D0080                                                                                                                                                                                                      
7
GETTING STARTED
MAKE SURE YOU HAVE RECEIVED ALL PARTS:
Check your packing list to verify that all listed parts have been received.  You should have the following:
   •   Cast Iron Stove with Burner Assembly
   •   Installation/Operating Instructions
   •   Ceramic fiber logs
   •   Four (4) Leg Levelers 
   •   Touch-up Paint 
Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.
   •   Hand-Held Remote with Receiver, Manual or Thermostat  
   •   Wall Switch with 15' Wire
   •   Wall T-stat with15' Wire
   •   Stove Mounted Thermostat Control 
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer 
from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts 
in good condition.
WHAT YOU WILL NEED FOR INSTALLATION:
You must have the following items available before proceeding with installation:
   •   External regulator (for propane/L.P.G.) or high pressure natural gas (1 to 2 PSI system) 
   •   Piping which complies with local codes
   •   Pipe sealant approved for use with propane/L.P.G.  (Resistant to sulfur compounds)
   •   Manual shutoff valve
   •   Sediment trap (recommended) 
   •   Tee joint
   •   Pipe wrench or appropriate wrench set 
   •   Screwdrivers
Handle the gas log burner assembly by the grate only.  Do not pick the unit up by the 
burners.
Gloves are recommended when handling ceramic fiber logs to prevent skin irritation 
from loose fibers. Logs are fragile--handle with care.
CAUTION