Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Enviro
  4. C-11212
  5. Benutzerhandbuch

Enviro C-11212 Benutzerhandbuch

Download
Seite von 35
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
B Y :   S H E R W O O D   I N D U S T R I E S   L T D
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
50-1096
Sienna
This appliance may be installed in an aftermarket permanently located, manufactured home (USA only) or 
mobile home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not 
convertible for use with other gases, unless a certified kit is used.
-  Do  not  store  or  use  gasoline  or  other 
flammable  vapours  and  liquids  in  the 
vicinity of this or any other appliance.
- 
WHAT TO DO IF YOU SMELL GAS
•  Open  windows/extinguish  any  open 
flame.
• Do not try to light any appliance.
•  Do  not  touch  any  electrical  switch;  do 
not use any phone in your building.
•  Immediately call your gas supplier from 
a  neighbour’s  phone.    Follow  the  gas 
supplier’s instructions.
•  If  you  cannot  reach  your  gas  supplier, 
call the fire department.
- Installation and service must be performed 
by a qualified installer, service agency or 
the gas supplier.
WARNING:    If  the  information  in  this 
manual  is  not  followed  exactly,  a  fire  or 
explosion  may  result  causing  property 
damage,  personal  injury  or  loss  of 
life.  Installation  and  service  must  be 
performed by a qualified installer, service 
agency or the gas supplier.
Massachusetts  installations  (Warning):  This  product  must 
be  installed  by  a  licensed  plumber  or  gas  fitter  when 
installed within the Commonwealth of Massachusetts. Other 
Massachusetts  code  requirements:  Flexible  connector  must 
not be longer than 36in., a shut off valve must be installed; 
only direct vent sealed combustion products are approved for 
bedrooms/bathrooms. A carbon monoxide detector is required 
in all rooms containing gas-fired direct vent appliances. The 
fireplace  damper  must  be  removed  or  welded  in  the  open 
position prior to installation of a fireplace insert.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
OWNER’S
         MANUAL