Halo Lighting System LV104 Merkblatt
278
LINEA
™
by
HALO
®
Channels
COOPER LIGHTING
S u r f a c e C h a n n e l s
Starting Surface Channel Runs with Electronic Power Supplies (choose one)
NOTE: Surface Channel may be up to 20’ with electronic power supplies and 40’ with magnetic power supplies.
NOTE: Surface Channel may be up to 20’ with electronic power supplies and 40’ with magnetic power supplies.
P L A N N I N G A L I N E A L AY O U T
S u r f a c e C h a n n e l
Surface-mount channel is used when
minimal size and weight are desirable.
Typical applications for surface-mount
are under-cabinet, in-cabinet, cove and
strip lighting. Surface-mount consists
of a housing with two square copper
conductors.
minimal size and weight are desirable.
Typical applications for surface-mount
are under-cabinet, in-cabinet, cove and
strip lighting. Surface-mount consists
of a housing with two square copper
conductors.
S i z e
Linea surface channel is 3/8" (9.5mm)
high and 3/4" (19mm) wide.
high and 3/4" (19mm) wide.
F i n i s h e s
White (P), Black (MB)
C o n n e c t o r s
Surface channel connectors and
feed points allow almost unlimited
configurations. Channels may be field
cut to any length. Channels can be
mechanically and electrically connected
by straight, right-angle and flexible
joiners. Electrical feeds to surface
channel are made using the end feed,
conduit feed, J-box feed or T-bar feed.
Feeds and joiners push into the end of
the channel and are secured with a
single screw. Electrical connections are
assured by compression-type, nickel-
plated brass terminal blocks.
feed points allow almost unlimited
configurations. Channels may be field
cut to any length. Channels can be
mechanically and electrically connected
by straight, right-angle and flexible
joiners. Electrical feeds to surface
channel are made using the end feed,
conduit feed, J-box feed or T-bar feed.
Feeds and joiners push into the end of
the channel and are secured with a
single screw. Electrical connections are
assured by compression-type, nickel-
plated brass terminal blocks.
G r o u n d i n g
Low-voltage lighting systems do not
require grounding when used with
LV500 series isolated power supplies.
require grounding when used with
LV500 series isolated power supplies.
P o l a r i t y
The lampholder adapter may be inserted
in either orientation, simplifying
installation and allowing greater than
360º rotation for maximum fixture
adjustment.
in either orientation, simplifying
installation and allowing greater than
360º rotation for maximum fixture
adjustment.
S p e c i f i c a t i o n s
Surface-mount channel consists of a
thermal plastic housing with two 10AWG
nickel-plated copper conductors.
Electrical capacity is:
12V, 25amp, 300 Watt maximum
24V, 25amp, 600 Watt maximum
thermal plastic housing with two 10AWG
nickel-plated copper conductors.
Electrical capacity is:
12V, 25amp, 300 Watt maximum
24V, 25amp, 600 Watt maximum
• LV102–2' Channel.
Actual length 20 3/16" (513mm)
Color Codes: P, MB
Color Codes: P, MB
• LV104–4' Channel.
Actual length 44 3/16" (1122mm)
Color Codes: P, MB
Color Codes: P, MB
• LV106–6' Channel.
Actual length 68 3/16"(1731mm)
Color Codes: P, MB
Color Codes: P, MB
• LV108–8' Channel.
Actual length 92 3/16" (2341mm)
Color Codes: P, MB
Color Codes: P, MB
LV202 Straight Joiner
LV203 Right-Angle Joiner
LV205 Flexible Joiner
LV501
Power Supply
60W max
10'
Cord
2', 4', 6', 8' Surface Channel
2', 4', 6', 8' Surface Channel
LV502
Power Supply
150W max
Power Supply
150W max
NOTE: LV502 Canopy can be
placed anywhere along channel
to utilize existing power sources.
placed anywhere along channel
to utilize existing power sources.
Magnetic
Power Supply
CHANNEL
120V or 277V Supply
12V or 24V Feed
Feed Point
ADDITIONAL CHANNEL
Joiner
LV 5 0 1
LV 5 0 2
LV 5 0 3
LV200 J-Box Feed
LV201 End Feed
LV204 Conduit Feed
LV206 T-Bar Feed
2’ Surface Channel
4’ Surface Channel
6’ Surface Channel
8’ Surface Channel
2’ Surface Channel
4’ Surface Channel
6’ Surface Channel
8’ Surface Channel
LV206 T-Bar Feed with
up to three additional
TB206 Terminal Blocks
up to three additional
TB206 Terminal Blocks
LV102, LV104, LV106, LV108
Power Supplies
Feed Points
Channels
Joiners
Additional Channels
LV503
LV506
LV507
LV508
LV509
LV506
LV507
LV508
LV509
S t a r t i n g a n d A d d i n g t o S u r f a c e C h a n n e l R u n s w i t h M a g n e t i c P o w e r S u p p l i e s
120V
Supply
Supply
2', 4', 6', 8'
Surface Channel
Surface Channel
LV503
150W max
150W max
Low Voltage
Feed
Feed
LV204
LINEA
™
by HALO
®
S U R FA C E C H A N N E L