Triarch 31912 Merkblatt

ASSEMBLY AND MOUNTING INSTRUCTION

ase read the Assembly lnstr

For 31912

Ple

uction sheet carefully before proceeding.Carefully unpack and

identify all parts prior to building the unit. Each part is identified on the drawing for reference.

ecure the mounting strap to the ceiling junction

ground wire to

e junction box ground port ;

TEP 6: Install center pipe and arms to the fixture

the fixture,glass

DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item
for any reason. Please repack the unit using the original carton and inserts.

STEP 1: Unpack all the parts and classify them according to the illustration shown at

the side.

Place the parts on a scratch free surface;

STEP 2: Make sure the power is turned off at the

junction box where the fixture is to be installed.

box using junction box screws;

STEP 3:Use the wire nuts to connect the positive

and negative wires .connect the

STEP 4: Secure the canopy to the ceiling with

the knurled ring;

STEP 5: lnstall the loop to the colum;

with nut and ball nut as shown;

STEP 7: Install the tempered glass by using the

rubber washer and the cap nut ;

STEP 8: Install the correct bulb (not provided);

STEP 9: Install threaded nipple to

Shade ,glass washer and nut. Secure with botto

ap and finial