Lightolier C6T6A-MHT6RF Merkblatt

20" to 30"

10-5/8" 

15

"

19

-5

/8

"

22-1/8" (Magnetic)

20-1/4" (Electronic)

19

-1

/8

"

Top View

Calculite

®  

HID Adjustable Accent

Page 1 of 2

6" Aperture, T6 Ceramic Metal Halide, Flood 

1. Flood Upper Reflector: Specular textured aluminum; provides 40° beam.

Interchangeable with 12° Spot (MHT6RS) and 25° Narrow Flood (MHT6RNF);
see spec sheets C6T6A-MHT6RS and C6T6A-MHT6RNF.

2. Trim Kit:: Low brightness aperture cone; anodized aluminum, self-flanged in

painted white or aperture-matching polished flange. Consult factory for other
finishes.

3. Lamp Shield: High-temperature glass as required by code; captive during 

re-lamping. 

4. Trim Kit Adjustment Mechanism: Provides 40° vertical tilt, 360° horizon-

tal rotation; lockable. Patented EZ-Aim Helical Drive System provides fast
and accurate hot aiming with Philips screwdriver.

5. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.

Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical perfor-
mance.

6. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover

for top re-lamping.

7. Frame Vertical Adjustment Mechanism: Accommodates mounting to vir-

tually any ceiling system using pre-installed mounting bars, or 1/2" EMT tub-
ing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture. 

8. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping

bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.

9. Retention Springs: Rust resistant springs secure trim for quick, tool-less

installation.

10. Ballast / Cover Assembly: Accessible from below and removable without

tools for inspection and ballast replacement .

11. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

90°C through branch circuit conductors. Allows inspection from below. 

12. Accessory Holder: (Not Shown) Sold separately catalog # CAH6; die-

formed steel, matte black finish, slide-in installation. Accepts up to two
4 3/4" dia. media.

13. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18 on-
consumer equipment, shut-down circuit at end of lamp life, sound rating “A”, 
-5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.
*150W Magnetic Ballast: 120V/277V dual voltage, 60 Hz., encased and 
potted, HX-HPF circuit type, high power factor, sound rating “B”, -20° F minimum
starting temperature, Type 1 Outdoor rating.

39W MH

M130

120/277

0.39/0.17 

44

70W MH

M139

120/277

0.67/0.28 78

150W MH  M142

120/277

1.40/0.60

167

* 150W MH  M142

120/277

3.70/1.60

180

Chicago Plenum: Consult Factory
Fuse (magnetic ballast):  Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)

UL (Suitable for Damp Locations), CSA, I.B.E.W.
For 150W, install fixtures with minimum spacing between:
1. Center-to-center of adjacent luminaries: 2 feet.
2. Top of luminaire to overhead building member: 1/2 inch.
3. Luminaire center to side building member: 1 foot.

C6A39T6E1 Electronic 120V

39W T6 

Ceramic MH

C6A39T6E2 Electronic 277V

39W T6 

Ceramic MH

C6A70T6E1 Electronic 120V

70W T6 

Ceramic MH

C6A70T6E2 Electronic 277V

70W T6 

Ceramic MH

C6A15T6E1 Electronic 120V

150W T6 

Ceramic MH

C6A15T6E2 Electronic 277V

150W T6 

Ceramic MH

Magnetic 120V/277V 150W T6 

Ceramic MH

Ceiling Cutout: 6 9/16" (167mm) Dia.

For Complete Fixture Order: Trim Kit + Upper Reflector (MHT6RF) + Frame-In Kit. Each Sold Separately.

Specular Clear, White Painted Flange

Specular Clear, Matching Flange

Comfort Clear Diffuse, White Painted Flange

Comfort Clear Diffuse, Matching Flange

Champagne Bronze, White Painted Flange

Champagne Bronze, Matching Flange

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

a Genlyte company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406