Cooper Lighting Indoor Lighting Accessories Merkblatt

(U.L. Listed E61165)

(U.L. Listed 912Y)

U.L. approved safety clips used to secure recessed
troffers to T-bar. EQ clips used on fixture sides and 

T3A End EQ Bracket Parts Bag

EQ end brackets for use on fixture ends.  

(Includes (4) Screws and (4) Brackets

Use four per fixture

Fixed Stem Set

Swivel Stem Set

(Deep canopy, 3/8" stem, 5/8" 
outside diameter)
XX= Length 6, 8, 12, 24, 36, 48, 60, 72

Adjustable Stem Set (1/4" IPS Stem, 1/2" O.D.)

Used with all surface fixtures as stem sets. SCS stems have 45° swivel, one direction. One set consists of
one stem assembly. Minimum of two sets required per fixture. NOTE: Coupler, 3/8" IPS Pipe Coupler to
join lengths. Coupler is standard baked white enamel or special order of black.

CCA=Adjustable Cable (XX=48" or 120")

CCF=Fixed Cable (XX=12", 15", 18", 21", 24" or 27")

PFC=Power Feed, coil power cord

PFS=Power Feed, straight power cord

NPF=Non Power Feed

Heavy gauge side filler panels for 20" x 48" fixture 
for use in a 2' x 4' ceiling installation. (Baked white 
finish/2 per set) 

Spaces fixture 1 1/2" to 2 1/2" from ceiling

6" Heavy gauge end fillers use 2 per fixture. End

fillers lay on T-bars and are held in place by fixtures
24-EFS-B (2x2, 2x4) but  are not attached

Heavy gauge end support brackets. Four per 

fixture are required when fixtures are supported 
from ends. Must be used with fixture that has a 
modified end plate (MEP). 

Kit including clips to install the CR Surface Corridor

fixture for wall mount applications.

Heavy Gauge Metal Construction.  Used with
Flanged Recessed Fixtures. (Intended to serve as
a plaster stop only, not to fit into an opening).

Items listed are the major accessories available on Metalux Recessed (Parabolic and Recessed) and Surface Fixtures. Additional options and accessories are available.
Consult Pre-Sales Technical Support for additional information.