Chief Manufacturing FSA-100 Benutzerhandbuch

Installation Instructions

FSA/KSA-1009

6

The security set screw is used to secure the pivot-pitch
wall mount. You will need the security hex keys
(provided) to install the security set screws.

There are two different wall plates, which require
different security requirements. Select the option that
applies to your configuration.

NOTE:  If your wall plate uses a 1/4-20 set screw,

replace it with a 1/4-20 x 5/8” security set screw
(40) and a 1/4-20 x 1/4” security screw (30).
The existing set screw in the wall plate is too
long to be used with the 1/4-20 x 1/4” security
screw.

1.  Verify that you have the correct parts.

2.  Remove the existing 1/4-20 x 1/4” set screw from the

wall plate.

3.  Install a 1/4-20 x 5/8” security set screw (40) and a

1/4-20 x 1/4” security screw (30) into the wall plate in
the order shown in Figure 6.

1.  Verify that you have the correct parts.

2.  Remove the existing 5/16-18 x 3/4” set screw from

the wall plate.

3.  Install the 5/16-18 x 3/4” security screw (50) in the

wall plate (see Figure 7).

1/4-20 x .625
Set Screw

1/4-20 x .25
Security Screw

5/16-18 x .75
Security
Set Screw