Sony SU-FL300L Benutzerhandbuch

7 

(GB)

1

Tighten the two supplied Cam-lock screws to the 
Top Board.

The illustration shown above is SU-FL300M as an 
example. For SU-FL300L, there are two reinforcing 
bars on the Top Board.

To prevent damaging the glossy surface of the Top Board, 
make sure to clean and place a soft cloth on the work surface.

2

Align and insert fixing brackets on both sides of the 
Top Board into the Side Pillars.

3

Secure the Side Pillars with the four supplied screws 
(+PWH5 × 25). And secure the two remaining Cam-
locks on the back side of the Rear Pillar.

* Before attaching the Top Board, make sure that the 

f mark points upward.

Be careful not to pinch your fingers when attaching the Top 
Board.

1

Align the three dowels of the TV Stand with the 
three holes of the Front Panel.

2

Turn the six Cam-lock screws on the Top and the 
Base Boards clockwise to secure the Front Panel. 
Then, attach the three supplied screw caps to the 
three bottom screws.

Be sure to attach the Front Panel in the correct direction.

(Continued)