Honeywell 5820XL Benutzerhandbuch

Through this programming option you can turn the strobe synchronization during silence 
feature On or Off, and select the control panel to report events by zone or by point. 

To edit miscellaneous options 2:

1. Enter the installer code.

2. Press 

 or 

 to display the main menu.

3. Select 

 for Program Menu.

Display reads:

Initializing

Please wait . . .

4. Select 

 for System Options.

5. Select 

 for Miscellaneous Options 2.

When "SYNC Strbs w/ Sil:" is Selected as Y (Yes) then strobes will continue to flash when the 
system is silenced and will stop flashing when the system is reset.

6. Press the 

 or 

 arrow to toggle this selection between Y (Yes) or N (No). 

7. Press 

 or 

 to make your selection and move to the next programming option.

Note: See Section 7.4.1.4 for more information about Synchronization protocol choices.

When this feature is programmed Y (Yes) then the oldest un-acknowledge event will 
automatically display on the control panel and remote annunciators after there has been no 
activity on any system touchpad for two minutes.

8. Press the 

 or 

 arrow to toggle this selection between Y (Yes) or N (No). 

9. Press 

 or 

 to make your selection and move to the next programming option.

When the "Report by" option is set to Zone, then the control panel will report events by zone. 
If Point is selected then the control panel will report events by point.

10. Press the 

 or 

 arrow to toggle this selection between Zone or Point.

11. Then press 

 or 

7

5

6