Honeywell 5820XL Benutzerhandbuch

The 5824 serial/parallel interface module allows you to connect a printer to the panel, so you 
can print a real-time log of system events, a report of detector status, and event history. 
Instructions for installing the 5824 appear below. The 5824 is for ancillary use only.

5824 installation involves the following steps:

1. Make sure power is off at the panel.

2. Connect the 5824 to the panel as shown in Figure 4-17.

3. Use the dipswitches on the back of the 5824 board to assign an ID# to the 5824 (see Sec-

4. Configure the 5824 device through programming. See Section 4.7.1.

5. Connect a printer to the 5824 as shown in Figure 4-18.