ONKYO SKW-550 Benutzerhandbuch
56
Advanced Setup
This section explains how to check the speaker settings
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some speaker settings are set automatically by the Auto-
matic Speaker Setup function (see page 37).
and how to set them manually, which is useful if you
change a speaker after performing the automatic speaker
setup.
Some speaker settings are set automatically by the Auto-
matic Speaker Setup function (see page 37).
Speaker Configuration
This section explains how to specify which speakers are
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
Large
(full band)
.
For those
with a smaller diameter, specify
Small
(default crossover 100 Hz)
.
The crossover frequency can be
changed on page 57.
changed on page 57.
Advanced Speaker Settings
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
2
Use the Up and Down [
]/[
]
buttons to select “Sp Config,”
and then press the [ENTER] but-
ton.
and then press the [ENTER] but-
ton.
3
While the Subwoofer setting is
selected, use the Left and Right
[
selected, use the Left and Right
[
]/[
] buttons to select
Yes
or
No
.
Yes:
Select if a subwoofer is con-
nected.
nected.
No:
Select if no subwoofer is con-
nected.
nected.
These settings are set automatically by the Automatic
Speaker Setup function (see page 37).
Speaker Setup function (see page 37).
Cone diameter
RECEIVER
SETUP
4
Use the Down [
] button to
select “Front,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
or
Large
.
Small:
Select if the front speakers are
small.
small.
Large:
Select if the front speakers are
large.
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
and does not appear.
5
Use the Down [
] button to
select “Center,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
,
Large
, or
None
.
Small:
Select if the center speaker is
small.
small.
Large:
Select if the center speaker is
large.
large.
None:
Select if no center speaker is
connected.
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
6
Use the Down [
] button to
select “Surround,” and then use
the Left and Right [
the Left and Right [
]/[
] but-
tons to select
Small
,
Large
, or
None
.
Small:
Select if the surround speak-
ers are small.
ers are small.
Large:
Select if the surround speak-
ers are large.
ers are large.
None:
Select if no surround speakers
are connected.
are connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
HT-SR800_En.book Page 56 Tuesday, January 30, 2007 11:09 AM