Panasonic SC-BT07 Benutzerhandbuch
27
RQT9483
Listening to the Radio
Up to 30 stations can be set in each band, FM and AM.
1 Press [RADIO] to select “FM” or “AM”.
This unit: Press [SELECTOR].
2 Press [STATUS] to select the position to start the
auto preset search.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
(FM: 87.50, AM: 522)
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer “Manual tuning” (B right).
* To change the frequency, refer “Manual tuning” (B right).
3 Press and hold [OK].
Release the button when “AUTO” is
displayed.
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
≥“SET OK” is displayed when the stations are set, and the radio tunes
to the last preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful.
Preset the stations manually (B right).
1 Press [RADIO] to select “FM” or “AM”.
2 Press the numbered buttons to select the
2 Press the numbered buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] > [OK].
To select a 2-digit number
e.g., 12: [1] B [2]
Alternatively, press [W, X] or [2, 1].
When a stereo FM broadcast is being received,
When a stereo FM broadcast is being received,
“ST” lights in the display.
≥The FM/AM setting is also shown on the TV display.
∫ If noise is excessive
When FM is selected
Press [AUDIO] to display “MONO”.
Press the button again to cancel the
mode.
≥The mode is also cancelled when you
Press [AUDIO] to display “MONO”.
Press the button again to cancel the
mode.
≥The mode is also cancelled when you
change the frequency.
≥This setting can be preset for each broadcasting station. When
“MONO” appears follow procedures 1 and 2 in “Presetting stations
manually” (> below).
When AM is selected
Press [AUDIO] to select “AM BP1” or “AM BP2” (whichever
receives the better quality).
Each time you press the button:
AM BP1
Press [AUDIO] to select “AM BP1” or “AM BP2” (whichever
receives the better quality).
Each time you press the button:
AM BP1
(.AM BP2 (BP=Beat Proof)
1 Press [RADIO] to select “FM” or “AM”.
2 Press [SEARCH
2 Press [SEARCH
6] or [SEARCH5] to select
the frequency.
≥Main unit:
Press [X TUNE W] to select the frequency.
≥When a radio broadcast is being
received, “T” lights in the display.
≥To start automatic tuning, press
and hold [SEARCH6] or
[SEARCH5] (main unit: [X TUNE W]) until the frequency
starts scrolling.
Tuning stops when a station is found.
∫ Presetting stations manually
Up to 30 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
1 While listening to the radio broadcast
Press [OK].
2 While “P” is flashing on the display
Press the numbered buttons to select a channel.
To select a 1-digit number
e.g., 1: [1] > [OK].
To select a 2-digit number
e.g., 12: [1] B [2]
A station previously stored is overwritten when another station is
stored in the same channel preset.
stored in the same channel preset.
Setting up the radio
Presetting stations automatically
EXT-IN
RADIO
STATUS
AUDIO
SEARCH
SEARCH
1
2
3
4
5
6
7
8
0
0
9
abc
def
jkl
mno
tuv
ghi
qrs
p
xyz
w
OK
SEARCH
SEARCH
SEARCH
Numbered
buttons
RADIO
AUDIO
STATUS
,
, OK
TUNE
SELECTOR
SETUP MIC
SD CARD
TUNE
SELECTOR
SELECTOR
TUNE
Listening/confirming the preset
channels
channels
Manual tuning
ST
T
MONO
T
Radio
SCBT207GN-RQT9483-L.book 27 ページ ２００９年５月２５日 月曜日 午後９時３６分