Optimus PRO SW-200P Benutzerhandbuch
Cat. No.
40-4081
PRO SW-200P 200-Watt Powered Subwoofer
Your Optimus PRO SW-200P 200
Watt Powered Subwoofer is designed
to give you the best possible low fre-
quency sound for the ultimate home
theater experience. You will be aston-
ished by the realism it adds to movie
sound effects and the power it lends to
all kinds of music.
Watt Powered Subwoofer is designed
to give you the best possible low fre-
quency sound for the ultimate home
theater experience. You will be aston-
ished by the realism it adds to movie
sound effects and the power it lends to
all kinds of music.
The subwoofer combines the power of
a built-in 200 watt RMS amplifier with a
responsive, 12-inch coated paper
cone woofer — all housed in a ported
bass-reflex enclosure to produce tight,
floor-rumbling powerful bass (down to
36 Hz) that you can feel as well as
hear!
a built-in 200 watt RMS amplifier with a
responsive, 12-inch coated paper
cone woofer — all housed in a ported
bass-reflex enclosure to produce tight,
floor-rumbling powerful bass (down to
36 Hz) that you can feel as well as
hear!
The infrared remote control lets you
turn the subwoofer on and off and reg-
ulate its volume without interrupting
your listening. The LED power indica-
tor lets you see at a glance when the
subwoofer is operating.
turn the subwoofer on and off and reg-
ulate its volume without interrupting
your listening. The LED power indica-
tor lets you see at a glance when the
subwoofer is operating.
Your subwoofer has an adjustable
high cut filter and high and low level in-
puts so it is easy incorporation into ex-
isting systems or it as an integral part
of a subwoofer/satellite combination.
high cut filter and high and low level in-
puts so it is easy incorporation into ex-
isting systems or it as an integral part
of a subwoofer/satellite combination.
It also has these features:
Auto On/Off — Automatically switch-
es the PRO SW-200P’s amplifier to
standby if the subwoofer does not re-
ceive a signal for 8–11 minutes.
es the PRO SW-200P’s amplifier to
standby if the subwoofer does not re-
ceive a signal for 8–11 minutes.
Power Indicator — The red LED on
VOLUME
lights when the amplifier re-
ceives an audio signal, and turns off
when the amplifier goes into standby
mode.
when the amplifier goes into standby
mode.
High Level Input — Lets you connect
the PRO SW-200P to an amplifier’s or
receiver’s speaker outputs.
the PRO SW-200P to an amplifier’s or
receiver’s speaker outputs.
Low Level Input — Lets you connect
the PRO SW-200P to an amplifier’s or
receiver’s line out jacks. These inputs
automatically sum left and right chan-
nel information.
the PRO SW-200P to an amplifier’s or
receiver’s line out jacks. These inputs
automatically sum left and right chan-
nel information.
Volume Control — Lets you match
the PRO SW-200P’s output level to
your satellite speakers’ output (if
used). Rotate it clockwise to increase,
or counterclockwise to decrease, the
subwoofer’s output.
the PRO SW-200P’s output level to
your satellite speakers’ output (if
used). Rotate it clockwise to increase,
or counterclockwise to decrease, the
subwoofer’s output.
©
1998 Tandy Corporation.
All Rights Reserved.
Optimus, Megacable, and RadioShack are registered trademarks used by Tandy Corporation.
40-4081.fm Page 1 Wednesday, August 11, 1999 11:02 AM