Runco LS-10I Benutzerhandbuch

Key Commands: The syntax for key commands is simple: 

Some key command examples:

Bring up or cancel menu display.

Switch to next user memory.

Apply 16:9 aspect ratio.

The response from the projector for key commands will be the same command in 
UPPERCASE.

Input: 

Response: 

Table 6-1 lists the serial command key names and IR codes. Use the IR codes to program 
a third-party remote control unit. 

0x00

pow.on

Turn power on. If the projector is already on, this 
toggles the input panel backlight. 

0x45

pow.off

Turn power off.

0x02

src.video

Switch the active source to Video.

0x1f

src.svid

Switch the active source to S-Video.

0x0a

src.hdmi1

Switch the active source to HDMI 1.

0x50

src.hdmi2

Switch the active source to HDMI 2.

0x1e

src.1

Perform action assigned by user to HD 1 button 
(switch active source or change PIP state).

0x40

src.2

Perform action assigned by user to HD 2 button 
(switch active source or change PIP state).

0x58

src.3

Perform action assigned by user to HD 3 button 
(switch active source or change PIP state).

0x1b

info

Bring up an information box with the first seven (7) 
items in the Service menu.

0x19

menu

Bring up or cancel menu display.

0x5c

exit

Exit all menus.

0x51

enter

Keypad enter. If PIP is active and no menu is 
present then this executes the PIP swap function.