Samsung 20080303092219921 Benutzerhandbuch
21
ENG
20
Press SETUP button, and then press the ENTER ( ) button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
button to select the “SPK SETUP”, and then
press the ENTER ( ) button.
Press
button to select the speaker you want.
•
Each time you press this button, FRONT
➝ CEN ➝ SURR ➝ S.BACK ➝
SUB
➝ CROVR will be selected in turn.
Press
…†
button to set the mode (LARGE, SMALL etc.)
for the selected speaker.
Repeat steps 3-4 to set the mode for each speaker.
To exit setup mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and Setup Mode is exited.
“SETUP OFF” appears on the display and Setup Mode is exited.
• LARGE : Select when using large speakers. You can listen to full
range sound.
• SMALL : Select this when using small speakers
• NONE : Select when no speaker is used
• YES (subwoofer) : Select when using the subwoofer speaker.
• NO (subwoofer) : Select when not using the subwoofer speaker.
• CROVR : Select the crossover frequency for the best bass response
• NONE : Select when no speaker is used
• YES (subwoofer) : Select when using the subwoofer speaker.
• NO (subwoofer) : Select when not using the subwoofer speaker.
• CROVR : Select the crossover frequency for the best bass response
in your room.
MAIN UNIT
1
2
4
5
3
OPERA
TION
Setting the speaker mode
Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration
and whether certain speakers are used or not.
and whether certain speakers are used or not.
Press SETUP/MENU button, and then press the ENTER button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
button to select the “SPK SETUP”, and then
press the ENTER button.
Press
button to select the speaker you want.
•
Each time you press this button, FRONT
➝ CEN ➝ SURR ➝ S.BACK ➝
SUB
➝ CROVR will be selected in turn.
Press
…†
button to set the mode (LARGE, SMALL etc.)
for the selected speaker.
Repeat steps 3-4 to set the mode for each speaker.
To turn the SUBWOOFER on or off.
Press SUBWOOFER button on the remote.
•
Each time you press this button, SUB : YES, SUB : NO will be selected in turn.
√
•
If FRONT is set to LARGE, you can select YES or NO for SUB.
•
If FRONT is set to SMALL, SUB is automatically set to YES.
NO cannot be selected.
NO cannot be selected.
1
2
1 Press SPK SELECT button to select the speaker you want.
•
Each time you press this button, FRONT
➝ CEN ➝ SURR ➝ S.BACK ➝
SUB
➝ CROVR will be selected in turn.
2 Press
…†
button to set the mode (LARGE, SMALL etc.)
for the selected speaker.
3 Repeat steps 1-2 to set the mode for each speaker.
3
4
5
REMOTE CONTROL
To exit setup mode
•
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
“SETUP OFF” appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER
FRONT(Front)
CEN(Center)
SURR(Surround)
S.BACK (Surround Back)
SUB(Subwoofer)
CROVR
(Crossover Frequency)
Possible Settings
LARGE,SMALL
LARGE,SMALL,NONE
LARGE,SMALL,NONE
LARGE,SMALL,NONE
LARGE,SMALL,NONE
LARGE,SMALL,NONE
YES,NO
60,80,100,120,
150,180,200(Hz)
Default Setting
SMALL
SMALL
SMALL
SMALL
SMALL
SMALL
SMALL
YES
150Hz
Using the SPK SELECT button
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 20