Runco Home Theater Projection System Benutzerhandbuch

Specifications

LightStyle™ LS-12HBd Installation/Operation Manual

125

PRE

IMINAR

7.1
LS-12HBd Projector
Specifications

Table 7-1 lists the LS-12HBd projector specifications.

7. Specifications

Table 7-1. LS-12HBd Projector Specifications

Projector Type:

Digital Light Processing™ (DLP), 3-chip, 16:9 SuperOnyx™
DMD™

Native Resolution:

Full HD 1920 x 1080 (1080p)

Estimated Lamp Life:

2000 hours, typical (260W power setting)
3000 hours, typical (230W power setting)

Aspect Ratios:

4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native

DTV Compatibility:

Refer to Table 7-2

Picture Size (16:9 Screen):

Recommended Width: 80 - 117 in.
Maximum Width: 175 in.

Processing:

Runco Dimension Digital Controller with ViVix IV™ technology
and BRiC (Backup, Recovery and Clone) tool

Control Options:

• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via

HDMI

• Ethernet

Inputs and Outputs:

• Digital Video x 2 (from Dimension Digital Controller)
• RS-232 (female DB9) for serial communications
• 3D Sync Out (female 3-pin, VESA standard mini-DIN) to IR

Emitter

Video Standards:

NTSC, PAL, SECAM, CEA-861D

Calibration:

ISF Certified Calibration Configuration

Throw Distance
(Factor x Screen Width):

Refer to Table 3-3

Horizontal & Vertical Offset:

Proteus 1: None
Proteus 2, 3, 4, 5, 6:
Horizontal: 30% of screen width left or right
Vertical: 65% of screen height up or down

Light Output (2D):

CSMS Specifications* – Home Theater Calibration:
2,592 ANSI Lumens; 94 Foot-Lamberts (fL)
Uncalibrated: 3,780 ANSI Lumens

*Measured on a 1.0 gain, 84" wide 16:9 screen

Contrast Ratio:

CSMS Contrast Ratio: >250:1 (ANSI);
10,000:1 full-on, full-off

Illumination System:

230W HPM lamp