Runco Home Theater Projection System Benutzerhandbuch
LightStyle™ LS-12HBd Installation/Operation Manual
57
PRE
L
IMINAR
Y
4.1
Using the On-Screen
Menus
Using the On-Screen
Menus
To display the Main Menu, press the MENU button on the remote control or Dimension
Digital Controller front panel (Figure 2-5).
Digital Controller front panel (Figure 2-5).
To select a menu item, use the
and
buttons on the remote control or Dimension
Digital Controller front panel to highlight it. Then, to confirm your selection, press ENTER
on the remote control or Dimension Digital Controller front panel.
on the remote control or Dimension Digital Controller front panel.
The LS-12HBd OSD menus are arranged hierarchically, as shown in Figure 4-1. Some
menu options apply only to certain input signal types. For example, Phase and Tracking
can only be adjusted for RGB, Component video or SCART signals.
menu options apply only to certain input signal types. For example, Phase and Tracking
can only be adjusted for RGB, Component video or SCART signals.
Figure 4-1. LS-12HBd OSD Menu Structure
4. Operation
Input Source
Composite 1
HDMI 1
Composite 2
HDMI 2
Composite 3
HDMI 3
Component
HDMI 4
HD 1
HDMI 5
HD 2
HDMI 6
SCART
HDMI 7
DisplayPort
HDMI 8
Aspect Ratio
16:9
4:3
Letterbox
VirtualWide
Cinema
Virtual Cinema
Native
Auto Cinema
Screen
Screen 1 / Screen 2
Picture
Brightness
Contrast
Color
Tint
Sharpness
Noise Filter
Input Position
Left/Right
Up/Down
Width
Height
Overscan
Overscan Mode
(Zoom/Crop)
(Zoom/Crop)
Phase
(RGB/Component/SCART signals only)
(RGB/Component/SCART signals only)
Tracking
(RGB/Component/SCART signals only)
(RGB/Component/SCART signals only)
Memory
Presets
Presets
Recall ISF Night or ISF Day
Recall/Save Custom 1 or Custom 2
Reset Custom 1 and Custom 2 to Factory
Default
Default
3D
Processing
Processing
3D Mode
(Auto, Off, Side-by-Side, Top-and-Bottom or
Frame Packing)
(Auto, Off, Side-by-Side, Top-and-Bottom or
Frame Packing)
Reverse Eyes
(On/Off)
(On/Off)
Sleep Timer
Off, 30 Minutes, 60 Minutes, 90 Minutes, 2
Hours or 4 Hours
Hours or 4 Hours
Information
Signal
System
Network
Field Service
Manufacturing
Calibration
Display Color -
Common Settings
Common Settings
Gain
-100, -99... 0 ... 99, 100 (Red, Green, Blue)
Offset
Gamma
Mode
(Simple / Advanced)
(Simple / Advanced)
Simple
(1.8, 2.0, 2.2, 2.35, 2.5)
(1.8, 2.0, 2.2, 2.35, 2.5)
Advanced
(0 (2.2 gamma curve),
1, 2, 3 ... 20 (custom gamma tables))
(0 (2.2 gamma curve),
1, 2, 3 ... 20 (custom gamma tables))
Color Temp
Simple (5500K, 6500K, 7500K or 9300K)
Color Gamut*
Auto, REC709, SMPTE-C, EBU, Native or
PCE
PCE
PCE*
Red x, y / Green x, y / Blue x, y / White x, y
Yellow x, y / Cyan x, y / Magenta x, y
Display Color -
Projector Settings
Projector Settings
Lamp
Power (230W or 260W)
Input Image
Brightness
-50, -49 ... 0 ... 49, 50
Contrast
Color
Tint
Sharpness
Input Color
Gain
-32, -31... 0 ... 31, 32
(HD 1, HD 2 and Component inputs only)
(HD 1, HD 2 and Component inputs only)
Offset
Chroma Delay
0, 1, 2 ... 7
(Composite inputs only)
(Composite inputs only)
Noise Filter
0, 1, 2 ... 63
Save ISF Night
Back / Confirm
Save ISF Day
Copy/Paste
Memory Preset
Copy Settings
Paste Settings
Aspect Ratio
Copy Settings
Paste Settings
Output Shift
Left/Right
-50, -49 ... 0 ... 49, 50
Up/Down
Width
-50, -49, 48 ... 0
Height
Screen Masking
0, 1, 2 ... 100
(Top / Bottom / Left / Right /
Test Pattern Enable)
(Top / Bottom / Left / Right /
Test Pattern Enable)
Image Alignment
Corner Alignment
Top Left / Top Right / Bottom Left /
Bottom Right / Test Pattern Enable
Bottom Right / Test Pattern Enable
Midpoint Alignment
Center / Top Middle / Left Middle /
Right Middle / Bottom Middle /
Test Pattern Enable
Right Middle / Bottom Middle /
Test Pattern Enable
Adjustment Mode
Both, Primary or Secondary
Splash Configure
Owner Name
ISF Calibrated
ISF Other
Splash Timer
5, 6, 7 ... 15 ... 59, 60
Splash Enable
On/Off
OSD Position
Hor. / Ver.
0, 1, 2 ... 100
Note: Default settings appear in bold type. Settings marked with an asterisk (*) apply to 2D content only.