Runco RS-900 Series RS1100 Series Betriebsanweisung
RS-900 and RS1100 Series Installation/Operation Manual
23
PRE
L
IMINAR
Y
Figure 3-7 shows the RS1100 Ultra/CineWide with AutoScope motor assembly.
Figure 3-7. RS1100 Ultra/CineWide with AutoScope Motor Assembly – Exploded
View
View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector by
turning them counterclockwise until they come
out.
or other soft surface. Then, remove the two
height adjusters at the front of the projector by
turning them counterclockwise until they come
out.
Standoff, 10mm x
5mm x M5,
Aluminum/Black
Anodize (4x)
4
5
Screw, Phillips
Pan-Head,
10-32 x 3/4” (4x)
1
AutoScope Lens Motor 2
Screw, Phillips Flat-Head,
10-32 x 1/2” (2x)
3
CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right
CineWide with
AutoScope
Ceiling Mount Adapter/
Projector Stand, Left
AutoScope
Ceiling Mount Adapter/
Projector Stand, Left
7
6 Screw, Phillips
Flat-Head,
Undercut,
M6 x 12mm
(4x)
Undercut,
M6 x 12mm
(4x)